rc:2s-micro-quadcopter
This is an old revision of the document!
Table of Contents
2S Micro Quadcopter
| Specifications | |
|---|---|
| Frame | DiaLFonZo-Copter MicroQuad V2 |
| FC | Naze32 |
| Motor | C10 2900KV x 4 |
| ESC | Turnigy Plush 6A x 4 |
| Prop | GWS like 4x2.5 x 4 |
| Receiver | FrSky TFR4-B |
| Battery | Turnigy nano-tech 2S1P 950 mAh |
| Weight | 122 g 167 g (with battery) |
| M2M | 17 cm |
Lessons learned
- Always check that motors have been assembled correctly, the C10s had the screw holding the mount in place misaligned resulting in one flying motor during first takeoff
Motor benchmark before build
The following motors were tested before starting the build:
- C10 2900KV with 4x2.5 prop (HobbyKing)
- BC1410 3500KV with 4x2.5 and 5x3 props (RCTimer)
- BC1410 3900KV with 4x2.5 prop (RCTimer)
- found to be not suitable, probably better with a 3" prop
The result is that C10 has better efficiency than BC1410 and it's the better option even as somewhat heavier.
rc/2s-micro-quadcopter.1336504736.txt.gz · Last modified: 08.05.2012 22:18 by vergo
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
