rc:2s-micro-quadcopter
This is an old revision of the document!
2S Micro Quadcopter
| Specifications | |
|---|---|
| Frame | DiaLFonZo-Copter MicroQuad V2 |
| FC | Naze32 |
| Motor | C10 2900KV x 4 |
| ESC | Turnigy Plush 6A x 4 |
| Prop | GWS like 4x2.5 x 4 |
| Receiver | FrSky TFR4-B |
| Battery | Turnigy nano-tech 2S1P 950 mAh |
| Weight | 122 g 167 g (with battery) |
| Size | 22 x 14 x 6 cm without battery, props aligned |
| M2M | 17 cm |
| Flight time | around 6-8 minutes |
Videos
Lessons learned
- Always check that motors have been assembled correctly, the C10s had the screw holding the mount in place misaligned resulting in one flying motor during first takeoff
- Use threadlock
Motor benchmark before build
The following motors were tested before starting the build:
- C10 2900KV with 4x2.5 prop (HobbyKing)
- BC1410 3500KV with 4x2.5 and 5x3 props (RCTimer)
- BC1410 3900KV with 4x2.5 prop (RCTimer)
- found to be not suitable, probably better with a 3" prop
The result is that C10 has better efficiency than BC1410 and it's the better option even as somewhat heavier.
rc/2s-micro-quadcopter.1339943169.txt.gz · Last modified: 17.06.2012 17:26 by vergo
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
