Differences

This shows you the differences between two versions of the page.

--- rc:diy-h-frame-fpv-quadcopter [01.03.2015 21:02]
vergo
+++ rc:diy-h-frame-fpv-quadcopter [19.06.2016 13:16] (current)
vergo
@@ Line 1: / Line 1: @@
 ~~NOTOC~~
+<note important>This quadcopter was dismantled on 18.6.2016 after 7 flights. The setup had some flaws (see the Notes sections) and [[rc:blackout-super-mini-h-quad|Blackout Super Mini H Quad]] filled the same original purpose better.</note>
 ====== DIY H-Frame FPV Quadcopter ======
-{{ :rc:files:fpvhframe:hquad_8inch_final.png?direct&400|}}
+{{ :rc:files:fpvhframe:diy_fpvquad.jpg?direct&400|}}
 ^  Specifications  ^^
-| Frame | DIY |
+| Frame | DIY (Plywood frame + square aluminium arms) |
 | FC | Naze32 (full), rev 5 |
 | Motor | T-Motor MT2206-23 1200KV x 4 |
@@ Line 12: / Line 14: @@
 | Prop | GemFan 8x4.5 x 4 |
 | Receiver | FrSky TFR4 |
+| Camera | CM-YN3130CH (PAL) with 2.8mm lens |
+| VTX | ImmersionRC 5.8 GHz 25 mW |
+| Antenna | Circular Polarized |
+| OSD | minimOSD with multiwiiosd |
 | Battery | Turnigy nano-tech 3S1P 2200 mAh |
 ^ ^^
+| Weight | 530 g\\ 710 g (with battery)\\ 750 g (with battery & mobius) |
 | M2M | 35 cm |
+| Flight time | around 6 minutes |
+===== Notes =====
+  * This frame ended up not getting much use as [[rc:blackout-super-mini-h-quad|Blackout Super Mini H Quad]] was suitable also for cruising and had a better form factor
+  * Outdated and heavy design
+  * Bigger 3S or similar 4S battery would likely have been more suitable
+    * Used motors are rated for 2-3S
+  * Lack of BEC causes one ESC to heat up far too much
+  * Long frame causes too easily shadows for signals
+===== The Plan =====
+{{:rc:files:fpvhframe:hquad_8inch_final.png?direct&550|}}

HumdiWiki

User Tools

Site Tools

Differences

Page Tools