This is an old revision of the document!

DIY H-Frame FPV Quadcopter

Specifications
Frame	DIY (Plywood frame + square aluminium arms)
FC	Naze32 (full), rev 5
Motor	T-Motor MT2206-23 1200KV x 4
ESC	Bull Tec 12A ESC (with simonk) x 4
Prop	GemFan 8x4.5 x 4
Receiver	FrSky TFR4
Camera	CM-YN3130CH (PAL) with 2.8mm lens
VTX	ImmersionRC 5.8 GHz 25 mW
Antenna	Circular Polarized
OSD	minimOSD with multiwiiosd
Battery	Turnigy nano-tech 3S1P 2200 mAh

Weight	530 g 710 g (with battery) 750 g (with battery & mobius)
M2M	35 cm
Flight time	around 6 minutes

Notes

This frame ended up not getting much use as Blackout Super Mini H Quad was suitable also for cruising and had a better form factor
Outdated and heavy design
Bigger 3S or similar 4S battery would likely have been more suitable
- Used motors are rated for 2-3S
Lack of BEC causes one ESC to heat up far too much
Long frame causes too easily shadows for signals