Differences

This shows you the differences between two versions of the page.

--- rc:turnigy-bonsai [28.07.2016 02:23]
vergo
+++ rc:turnigy-bonsai [28.07.2016 02:24] (current)
vergo
@@ Line 16: / Line 16: @@
 ===== Notes =====
-  - the carbon rods + z bend pieces don't stay well together using only heatshrink
+  * the carbon rods + z bend pieces don't stay well together using only heatshrink
-  - heavier than suggested battery was needed for achieving correct center of gravity
+  * heavier than suggested battery was needed for achieving correct center of gravity
-  - the servos stays well in place even without glue
+  * the servos stays well in place even without glue
-  - battery and receiver compartments are too small by default
+  * battery and receiver compartments are too small by default
-  - hot glue was used during assembly instead of CA
+  * hot glue was used during assembly instead of CA
-  - HobbyKing ESC replaced with HobbyWing ESC on 28.7.2016 to get break support
+  * HobbyKing ESC replaced with HobbyWing ESC on 28.7.2016 to get break support

HumdiWiki